Automatic Foot Clutch
I built this contraption to push in the clutch when I had a bad ankle. It worked fine for shifting but I had to use the foot clutch as normal when starting out-...
1994 total views, 0 today
Bathtub Electrocution Myth
As a life-long "Maker," I've always doubted the stories about electrocuting someone by throwing an appliance into the bathtub. After watching a show recently ab...
1923 total views, 0 today
Raspberry Pi-3 Laptop
I wanted a Raspberry Pi Laptop to take into coffee shops but for some reason they are very expensive. The green "Pi-Top" on Ebay looks nice but is about 850 dol...
1866 total views, 0 today
NV200 Solar Panel
I wanted a separate electrical system for camping and other uses so I put in a Solar Panel Kit. Total cost was about 350 Canadian dollars. This included a 100 w...
1822 total views, 0 today
car speed sensor repair
Here is an easy fix I stumbled upon when my speed sensor died in my Jeep Cherokee. Most speed sensors I've seen are on the transmission and are basically the sa...
1797 total views, 0 today
NV200 Roof Rack
NV200 Roof Racks are quite expensive. Also I couldn't find a basic simple roof rack for my van and didn't want a heavy duty industrial type. No other choice tha...
1694 total views, 0 today
NV200 Steering Wheel Audio Control
This project is to outline the steps you can take to hook up steering wheel control buttons from a stock Nissan NV200 van -- onto an aftermarket stereo unit wit...
1689 total views, 1 today
NV200 Brakes Front
Front brake pads are fairly easy to do on an NV200. Mine is a 2013 US model. The tools required are: --21mm socket for lug nuts --14mm socket for brake cali...
1644 total views, 0 today
Asus z390-E Gaming Computer Build
I was torn between installing Windows 10 onto my faithful 9 year-old Asus P6T running Windows 7 Ultimate, or buying a new computer. In the end, I couldn't bring...
1608 total views, 2 today
NV200 Brakes Rear
Doing the rear brakes on the NV200 is quite straight-forward. Remove tire and pull off the drum by placing two #8 metric bolts into the drum itself and pull out...
1557 total views, 0 today